WEKO3
アイテム
Failure mode analysis of preliminary design of ITER divertor impurity monitor
https://repo.qst.go.jp/records/48896
https://repo.qst.go.jp/records/488966fbde8fc-c2e2-487f-9eaf-0a9f64bd3364
| アイテムタイプ | 学術雑誌論文 / Journal Article(1) | |||||
|---|---|---|---|---|---|---|
| 公開日 | 2018-05-08 | |||||
| タイトル | ||||||
| タイトル | Failure mode analysis of preliminary design of ITER divertor impurity monitor | |||||
| 言語 | ||||||
| 言語 | eng | |||||
| 資源タイプ | ||||||
| 資源タイプ識別子 | http://purl.org/coar/resource_type/c_6501 | |||||
| 資源タイプ | journal article | |||||
| アクセス権 | ||||||
| アクセス権 | metadata only access | |||||
| アクセス権URI | http://purl.org/coar/access_right/c_14cb | |||||
| 著者 |
北澤, 真一
× 北澤, 真一× 小川, 宏明× 北澤 真一× 小川 宏明 |
|||||
| 抄録 | ||||||
| 内容記述タイプ | Abstract | |||||
| 内容記述 | The objective of the divertor impurity influx monitor (DIM) for ITER is to measure the parameters of impurities and hydrogen isotopes (tritium, deuterium, and hydrogen) in divertor plasma using visible and UV spectroscopic techniques in the 200–1000 nm wavelength range. In ITER, special provisions are required to ensure accuracy and full functionality of the diagnostic components under harsh conditions (high temperature, high magnetic field, high vacuum condition, and high radiation field). Japan Domestic Agency is preparing the preliminary design of the ITER DIM system, which will be installed in the upper, equatorial and lower ports. The optical and mechanical designs of the DIM are conducted to fit ITER’s requirements. The optical and mechanical designs meet the requirements of spatial resolution. Some auxiliary systems were examined via prototyping. The preliminary design of the ITER DIM system was evaluated by RAMI analysis. The availability of the designed system is adequately high to satisfy the project requirements. However, some equipment do not have certain designs, and this may cause potential technical risks. The preliminary design should be modified to reduce technical risks and to prepare the final design. | |||||
| 書誌情報 |
Fusion Engineering and Design 巻 112, p. 74-80, 発行日 2018-05 |
|||||
| 出版者 | ||||||
| 出版者 | Elsevier | |||||
| DOI | ||||||
| 識別子タイプ | DOI | |||||
| 関連識別子 | 10.1016/j.fusengdes.2016.07.016 | |||||
