| アイテムタイプ |
学術雑誌論文 / Journal Article(1) |
| 公開日 |
2024-02-02 |
| タイトル |
|
|
タイトル |
Design and manufacturing of resistive wall mode control coil of JT-60SA |
|
言語 |
en |
| 言語 |
|
|
言語 |
eng |
| 資源タイプ |
|
|
資源タイプ識別子 |
http://purl.org/coar/resource_type/c_6501 |
|
資源タイプ |
journal article |
| 著者 |
Takechi Manabu
Y. Itashiki
Murakami Haruyuki
Sukegawa Atsuhiko
Tsuru Daigo
Nakamura Shigetoshi
Yamamoto Satoshi
Iijima Takaaki
Isayama Akihiko
|
| 抄録 |
|
|
内容記述タイプ |
Abstract |
|
内容記述 |
Resistive wall mode control coils (RWMCs) will be installed in the vacuum vessel of JT-60SA. Since 200 ?C baking of vacuum vessel on JT-60SA is performed to remove the impurity in the plasma facing components, in-vessel components must be made with heat-resistant materials such as metal and ceramic or must be cooled with water. We looked for the heat-resistant organic insulator for JT-60SA RWMC and performed the heat resistant test for several resins. However, no resin passed the test (Sukegawa et al., 2015). We again performed the heat resistant test of several organic insulator in the circumstances without air and finally found that the some Bismaleimide?Triazine (BT) resin has enough heat resistance without air. We designed the eight-turn RWMC with the BT resin. Based on this design, the specification of RWMC and power supply requirement are decided. For the design of RWMC, the finite element (FEM) analysis of electromagnetic force during disruption and thermal stress during baking and operation were performed. Manufacturing of the RWMC has already launched. |
| 書誌情報 |
Fusion Engineering and Design
巻 197,
発行日 2023-11
|
| ISSN |
|
|
収録物識別子タイプ |
ISSN |
|
収録物識別子 |
0920-3796 |
| DOI |
|
|
|
識別子タイプ |
DOI |
|
|
関連識別子 |
https://doi.org/10.1016/j.fusengdes.2023.114036 |
