@article{oai:repo.qst.go.jp:00075771,
 author = {吉田, 英治 and 蛭海, 元貴 and 田島, 英朗 and 田久, 創大 and 錦戸, 文彦 and 山谷, 泰賀 and Yoshida, Eiji and Hirumi, Genki and Tashima, Hideaki and Takyu, Sodai and Nishikido, Fumihiko and Yamaya, Taiga},
 journal = {Nuclear Instruments and Methods in Physics Research Section A: Accelerators, Spectrometers, Detectors and Associated Equipment},
 month = {Apr},
 note = {Previously, we had developed a four-layered depth-of-interaction (DOI) PET detector based on the light sharing method. Reflectors, which were inserted in every two lines of crystal segments and shifted differently for each layer, projected 3D crystal positions onto a 2D position histogram without any overlapping after applying the Anger-type calculation. The best crystal separation we ever obtained was for the four-layered 32×32 array of LYSO crystals sized at 1.45×1.45×5mm3. However, assembling small crystals tended to cost a lot, and fine tuning of the front-end circuit was required to get fine crystal identification. In this paper, therefore, we proposed a more practical four-layered DOI detector. Its key concept was that the crystals in the top layer, which have the highest detection efficiency, are the biggest contributors to the PET spatial resolution. We applied two new ideas: (1) using quarter size crystals only for the first (top) layerand (2) inserting a thin light guide between the first and the second layers of the crystal array. In the developed prototype detector, we used 24×24 LYSO crystals of quarter size (1.4×1.4×5.0mm3) in the first layer and the other layers were 12×12 arrays of crystals of 2.8×2.8×5.0mm3. For better crystal identification of small crystals in the first layer, we optimized the optical condition between crystals by using an optical adhesive and air. Also, the thin light guide of 0.5mm thickness was inserted between the first and the second layers for improvement of crystal identification of the first layer. With the appropriate insertion of the light guide, all crystals of the first layer were identified as well as the crystals in the other layers. Our developed four-layered DOI detector showed good potential for high spatial resolution without a large increase in the number of crystals.},
 pages = {1--7},
 title = {Four-layered DOI-PET detector with quadrisected top layer crystals},
 volume = {933},
 year = {2019}
}