@article{oai:repo.qst.go.jp:00049489,
 author = {染谷, 洋二 and 工藤, 広信 and 飛田, 健次 and 日渡, 良爾 and 坂本, 宜照 and Special Design Team for Fusion DEMO, Joint and Someya, Yoji and Tobita, Kenji and Hiwatari, Ryoji and Sakamoto, Yoshiteru},
 journal = {Fusion Engineering and Design},
 month = {Mar},
 note = {A conceptual design of breeding blanket module with pressure tightness against in-box LOCA has been carried out, based on a pressurized water-cooled solid breeder blanket. The cooling water for DEMO is operated at the PWR water conditions of 15.5 MPa and 290 ºC-325 ºC. In this design, the breeding area of the module is divided into 0.1-m-squared cells with rib structure and has simple interior for mass production using a mixed pebbles bed of Li2TiO3 pebbles and Be12Ti ones. As a result, a rib with the thickness of 0.015m is needed to withstand the design pressure of 17.2 MPa by a stress analysis. The cooling system for the blanket module is designed by fluid dynamics analysis based on the PWR water conditions, and the outlet coolant temperature and the pressure drop are 321 ºC and 0.32 MPa, respectively. It was found that the self-sufficient production of tritium is likely to be satisfied with the blanket radial width thickness of 0.70 m or more and with an idea to improve TBR that the coolant is changed from existing light water to heavy water.},
 pages = {894--897},
 title = {Development of water-cooled blanket concept with pressure tightness against in-box LOCA for Japan’s DEMO},
 volume = {146},
 year = {2019}
}