@article{oai:repo.qst.go.jp:00048196,
 author = {Martovetsky, N. and 礒野, 高明 and Bessette, D. and 高橋, 良和 and 布谷, 嘉彦 and 名原, 啓博 and 尾関, 秀将 and 河野, 勝己 and 齊藤, 徹 and 諏訪, 友音 and 奥野, 清 and Devred, A. and Gauthier, F. and Mitchell, N. and Zanino, R. and Savoldi, L. and Bonifetto, R. and Breschi, M. and Ciazynski, D. and Reiersen, W. and Smirnov, A. and Khodak, A. and Bruzzone, P. and Rodin, I. and Tronza, V. and Torre, A. and Nicollet, S. and Zani, L. and Louzguti, A. and Duchateau, J.L. and 礒野 高明 and 高橋 良和 and 布谷 嘉彦 and 尾関 秀将 and 河野 勝己 and 齊藤 徹 and 諏訪 友音 and 奥野 清},
 issue = {4},
 journal = {IEEE Tranzaction on Applied Superconductivity},
 month = {Jun},
 note = {The ITER central solenoid (CS) is a highly stressed magnet that must provide 30 000 plasma cycles under the ITER prescribed maximum operating conditions. To verify the perfor-mance of the ITER CS conductor in conditions close to those for the ITER CS, the CS insert was built under a USA–Japan collaboration. The insert was tested in the aperture of the CSMC facility in Naka, Japan, during the first half of 2015. A magnetic field of up to 13 T and a transport current of up to 60 kA provided a wide range of parameters to characterize the conductor. The CS insert has been tested under direct and reverse charges, which allowed a wide range of strain variation and provided valuable data for characterization of the CS conductor performance at different strain levels. The CS insert test program had several important goals as follows. 1) Measure the temperature margin of the CS conductor at the relevant ITER CS operational conditions. 2) Study the effects of electromagnetic forces and strain in the cable on the CS conductor performance. 3) Study the effects of the warmup and cooldown cycles on the CS conductor perfor-mance. 4) Compare the conductor performance in the CS insert with the performance of the CS conductor in a straight hairpin configuration (hoop strain free) tested in the SULTAN facility. 5) Measure the maximum temperature rise of the cable as a result of quench. The main results of the CS insert testing are presented and discussed.},
 title = {ITER Central Solenoid Insert Test Results},
 volume = {26},
 year = {2016}
}